GUIDE TO INSTALLATION AND OPERATION
Input/Output – Section 1
Input
IN 1 (Button) – Allows the user to configure video processing channel 1 input. The first press will place the system into the Active mode (solid LED’s); the second press will place the system into the Update mode (flashing LED’s)
Button Color
Red
Orange
Green
Cyan
Blue
Blue
| State | Mode | Comments |
| Flashing | Update | No input signal present on SDI 1 |
| Flashing | Update | Currently selected format does not match input signal on SDI 1 |
| Solid | All | (manual input mode) |
| IN 1 is available, but not selected | ||
Solid | Active | Shows association with currently selected output | |
| Solid | Active | Shows current state of IN 1 (all sections follow) |
| Flashing | Update | Shows that IN 1 is in Update mode (all sections follow) |
IN 2 (Button) – Allows the user to configure processing channel 2 input. The first press will place the system into the Active mode (sold LED’s); the second press will place the system into the Update mode (flashing LED’s)
Button Color
Red
Orange
Green
Cyan
Blue
Blue
Off
State | Mode | Comments |
Flashing | Update | No input signal present on SDI 2 |
Flashing | Update | Currently selected format does not match input signal on SDI 2 |
Solid | All | (manual input mode) |
IN 2 is available, but not selected | ||
Solid | Active | Shows association with currently selected output |
Solid | Active | Shows current state of IN 2 (all sections follow) |
Flashing | Update | Shows that IN 2 is in Update mode (all sections follow) |
n/a | All | When disabled by keyed package |