Tag Call

Tag Call allows you to signal that you are the victim of a threatening or malicious call. Using the tag, your system administrator or telephone company can identify the source of the call and provide this information to appropriate personnel or authorities.

CAUTION: Tagging a non-malicious call may result in fines or other penalties.

To tag a malicious call:

zPress the Tag Call feature key while the call is in progress.

See "Programming the Feature Keys" elsewhere in this guide for information on programming a Tag Call feature key to your phone. -OR-

zPress TRANS/CONF.

zDial *55.

If the call was successfully tagged "Thank You" is shown on the display; otherwise, "Not Allowed" is displayed.

Note: Tag Call can be used on active two-party calls only. Calls on hold and conference calls cannot be tagged.

-20-

Page 24
Image 24
Mitel 5205 IP Phone manual Tag Call, To tag a malicious call