Speed Call Keys

You may use Speed Call Keys to make a call or to send a string of digits during a call (press a Speed Call Key during a call to send a multi–digit password, for instance).

To dial a stored Speed Call number:

1.Lift the handset.

2.Press a Speed Call key.

To store a Speed Call number:

1.Press ( SUPERKEY ).

2.Press # or the No softkey until "Personal Keys?" appears.

3.Press * or the Yes softkey.

4.Press a personal key that isn't a line key.

5.Press * or the Change softkey

6.On a 5224 IP Phone only, press the Yes softkey.

7.Do one of the following:

„To enter a new number, dial the number (press ( HOLD ) between digits to create a one–second pause during dialing; press ( HOLD ) more than once to lengthen the pause.)

„To enter a trunk flash, press ( TRANS/CONF ). (See "Trunk Flash" for more information about the use of this feature.)

„To enter the last number dialed, press ( REDIAL ).

8.On a 5212 IP Phone only, press the personal key again.

9.Do one of the following:

„To make the number private, press * or the Priv softkey

„To keep the number visible, press # or the Save softkey.

10. Press ( SUPERKEY ).

-17-

Page 22
Image 22
Mitel 5212/5224 manual Speed Call Keys, To dial a stored Speed Call number, To store a Speed Call number