To make an Emergency Call using the Line Interface Module line, when the IP connection has failed:

1.Lift the handset.

2.Press the Line Interface Module key that you have programmed. The set indicates IP FAIL: ANALOG CALL.

3.Dial your Local Emergency Number.

EMERGENCY CALLS WHEN EMERGENCY CALL ROUTING PROGRAMMED

Note: This procedure is in addition to the methods described above.

To make an Emergency Call if Emergency Call Routing is programmed:

1.Lift the handset.

2.Dial your Local Emergency Number (911 or equivalent).

For more information on using the Line Interface Module line, refer to Using the Line Interface Module.

-15-

Page 20
Image 20
Mitel 5212/5224 manual Emergency Calls When Emergency Call Routing Programmed