To make an Emergency Call using the Line Interface Module line, when the IP connection has failed:
1.Lift the handset.
2.Press the Line Interface Module key that you have programmed. The set indicates IP FAIL: ANALOG CALL.
3.Dial your Local Emergency Number.
EMERGENCY CALLS WHEN EMERGENCY CALL ROUTING PROGRAMMED
Note: This procedure is in addition to the methods described above.
To make an Emergency Call if Emergency Call Routing is programmed:
1.Lift the handset.
2.Dial your Local Emergency Number (911 or equivalent).
For more information on using the Line Interface Module line, refer to Using the Line Interface Module.
Phonebook
For each letter in the name, press the appropriate key on the keypad until the letter is shown in the display; for example, if the letter C is required,
press the digit 2 three times. Use the | softkey to correct errors. If the next | |
letter in a name is on the same key as the previous letter, press the | ||
softkey before proceeding. If required, use the | softkey to add a space | |
between the first and last name. |
|
|
To use Phonebook:
1.Press the Phonebook softkey.
2.Enter the name of the desired party.
3.Press the Lookup softkey.
4.If no match exists, edit the original entry.
5.If the name is not unique, press the Next softkey.
6.Do one of the following:
To make the call, press the Call softkey.
To edit the entry, press the Retry softkey.
To exit, press SUPERKEY.
