Mitel IP8820 manual Setting Your Preferences, LCD Contrast, Ring Setting

IP8820 Broadworks IP Phone

User Guide

5. Setting Your Preferences

In the LCD Menu, you can set various preferences for the IP Phone. Settings you can adjust include:

-LCD contrast

-Ring Setting

-Ringer off

-Headset auto mode

-Flexible button settings

-Time Configuration

-Outgoing Call Lock

-Speed Number Dialing

-Key Tone

-Language

The following paragraphs provide detailed instructions for each of the preferences as well as descriptive information for each.

5.1. LCD Contrast

The contrast of the LCD is adjustable for best viewing angle.

To adjust the LCD contrast:

oPress the Setting () button.

oDial 3, or move the cursor to 3.Phone Settings using the Previous-Next softkeys and press the

OK softkey.

oDial 1, or move the cursor to 1.LCD Contrast using the Previous-Next softkeys and press the OK softkey.

o	Press the			Down	softkey to decrease the contrast, or press		LCD Contrast
	the	Up	softkey to increase the contrast.
							■■■■□□□
o	Move to another parameter with the navigation buttons and
							Down	Up
	continue the session or press the Setting (					) button to

exit the configuration session.

5.2. Ring Setting

Ring settings determine the ring type (tone) for the phone. You may select one of up to fourteen ring signals. Of the fourteen signals, nine are stored in permanent memory. The remaining five must be downloaded from an external source prior to use. In addition, the ring type for each line can be set with immediate or delayed audible notification. Note that the ring type set for a contact in the Phone Book has priority over the phone or line settings, see section 4.2.

5.2.1. Setting the Ring Type

The IP Phone uses one of fourteen distinctive ring types for incoming call notification. Nine are stored in the memory of your IP Phone and the remaining five (5) must be downloaded prior to use. By assigning different ring signals to closely located phones, you can identify the ringing phone. The ring type assigned for the IP Phone is the “Default Ring Type” for incoming calls to the phone. The Default Ring may be set to one of the fourteen tones or “Ringer Off”, see section 5.3.

13 Dec. ‘08