IP8820 Broadworks IP Phone
User Guide
To set the ring type for the phone:
oPress the Setting (
) button.
oDial 3, or move the cursor to 3.Phone Settings using the
OK softkey.
oDial 2, or move the cursor to 2.Ring Setting using the
o Dial | 1, or move the cursor to 1.Default Ring Type using | Ring Setting |
|
| |||||
the | Previous | - | Next | softkeys and press the | OK | softkey. An | >1.Default Ring Type |
| |
asterisk, », displays in front of the current setting. | Previous | Next | OK | ||||||
o | Select the ring type using the | Next | softkey. Press the | Play | Default Ring Setting |
| |||
| softkey to hear the selected tone. |
| |||||||
o | *Type1 |
|
| ||||||
Press the | OK | softkey to save the selected the ring type. | Play | Next | OK | ||||
| |||||||||
oMove to another parameter with the navigation buttons and
continue the session or press the Setting (
) button to exit the configuration session.
5.2.2. Setting Line Ring Type and Delay
You can assign each line with a different ring type to distinguish which line is ringing. Selections for the type include one of up to fourteen tones, “Ringer Off” or “Set to Default”, see section 5.2.1 . Of the fourteen tones, five are permanently stored in the memory of the phone and the remaining five must be downloaded before use. In addition, for each line the ring signal can be immediate or delayed. The delay is set in 1 second increments from 0 (no delay) to 10 seconds.
To set the ring type for a line:
oPress the Setting (
) button.
oDial 3, or move the cursor to 3.Phone Settings using the
oDial 2, or move the cursor to 2.Ring Setting using the
o Dial the Line number plus one (2 for Line 1, 3 for Line 2, | Ring Setting |
|
| ||||||||||||
| etc.), or move the cursor to 2.Line n Configuration using | >2.Line 1 Configuration |
| ||||||||||||
| the | Previous | - | Next | softkeys and press the | OK | softkey. The | Previous | Next | OK | |||||
| value of n is the Line button number. |
|
|
| |||||||||||
o Dial 1, or move the cursor to 1.Ring Type using the | Line 1 Configuration |
| |||||||||||||
| Previous | - | Next | softkeys and press the | OK | softkey. Note | >1.Ring Type |
|
| ||||||
| the line number displays in parenthesis after “Ring Type”. | Previous | Next | OK | |||||||||||
o Select the ring type using the | Next | softkey. Press the | Play | Ring Type | (1) |
|
|
|
| ||||
softkey to hear the selected tone. An asterisk, », displays | *Set to Default |
| ||||
in front of the current setting. | Play | Next | OK | |||
oPress the OK softkey to save your entry.
oMove to another parameter with the navigation buttons and continue the session or press the Setting (
) button to exit the configuration session.
To set delayed ring for a line:
oPress the Setting (
) button.
oDial 3, or move the cursor to 3.Phone Settings using the
14 | Dec. ‘08 |
