Mitsubishi 230 SB manual Contents, Quick Start

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED.

REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK • DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully in order to avoid any problems.

English

Contents

		Your new Diamond Plus 230SB monitor box* should contain the
		following:
		• Diamond Plus 230SB Monitor with tilt/swivel base
		•	Power cord
		• Video Signal Cable (VGA - VGA)
		•	User’s Manual
User’s Manual		•	Sales Office List
		•	CD-ROM:
			Includes complete User’s Manual in PDF format and Windows
			related files (INF file and colour profile). To see the complete
		CD-ROM	User’s Manual, Acrobat Reader 4.0 must be installed at your PC.
		* Remember to save your original box and packing material to
Sales		Video Signal Cable	transport or ship the monitor.
Office List	Power Cord

(VGA –VGA)

Quick Start

Mac Adapter (not included)

Figure A.1 Figure B.1

To attach the Diamond Plus 230SB monitor to your system, follow these instructions:

1.Turn off the power to your computer.

2.If necessary, install the display card into your system. For more information, refer to the display card manual.

3.For the PC: Connect one end of the signal cable to the connector of the display card in your system (Figure A.1). Tighten all screws.

For the Mac: Connect the Macintosh cable adapter (not included) to the computer (Figure B.1).

Attach one end of the signal cable to the Macintosh cable adapter (Figure B.1).

NOTE: Some Macintosh systems do not require a Macintosh cable adapter.

Power Outlet

Power Cord

Figure C.1

Power Button

Power Indicator

Figure D.1

4.Connect the other end of signal cable connector on the back of the monitor.

NOTE: Incorrect cable connections may result in irregular operation, damage display quality/components of CRT monitor.

5.The Windows® 95/98/2000/Me/XP INF file for your monitor can be found on the CD-ROM, delivered with the monitor.

6.Connect one end of the power cord to the AC inlet on the back of the monitor and the other end to the power outlet (Figure C.1).

7.Turn on the monitor (Figure D.1).

8.Turn on the Computer.

NOTE: If you have any problems, please refer to the Troubleshooting section of this User’s Manual.

English-1

01_English 1 08/05/2002, 15:34