7
Wall-Mounting
To order a
To order a
Complete installation instructions are included with the kit.
Stand Removal Prior to Wall-Mounting
CAUTION
At least TWO PEOPLE are needed to safely remove the stand. Have one person hold the TV while the other person removes the stand. Failure to follow these recommendations may result in personal injury and damage to the product.
Note
•
•40- or
1.Disconnect the TV’s AC power cord from the AC power outlet.
2.Spread the protective sheet that was wrapped around the TV on a flat, even surface, such as a sturdy table. The protective sheet will help prevent damage to the display.
IMPORTANT: To avoid damaging the screen, make sure there are no foreign objects under or on top of the protective sheet.
3.Position one person on each side of the TV (left and right sides). Have each person firmly grasp their side of the TV and gently place it face down on the pro- tective sheet with the display stand hanging over the edge of the table. See the illustration to the right.
4.Use a magnetic philips screwdriver to remove the stand screws from the recessed holes (see illustra- tion to right). Note: A regular screwdriver can be used with a separate magnetic
5.While one person holds the TV with both hands, have the other person grasp the stand (see illustra- tion to the right) and remove the stand by pulling it away from the TV in the direction of the large arrow shown in both illustrations.
574UBOE
1SPUFDUJWF TIFFU
5BCMF |
| 40- and | |
| ||
(6 screws) |
| (4 screws) |
|
|
|
Protective
Sheet
Pull stand to remove.
Downloaded From
For assistance call 1(800)