Connecting USB Devices | Mitsubishi Electronics DV180 instruction

Connecting USB Devices

With the Diamond View DV180’s built-in hub, you can easily connect up to 4 USB devices to the computer via the hub. To connect the USB hub to the PC:

1.Turn the system power off.

2.Connect the USB cable to the computer and to the upstream USB port at the rear of monitor.

3.Connect the USB cables of any other peripherals to the downstream USB connectors at the rear of the monitor.

4.Turn the monitor and the computer on.

9

Image 11

Mitsubishi Electronics DV180 user manual Connecting USB Devices

Contents

User’s Manual Page Table of Contents Dealer Information Copyright DisclaimerMonitor Information Safety Instructions Safety Instructions and Maintenance Unpacking the Monitor FeaturesIntroduction High Quality Ratiometric Expansion Lower Power ConsumptionPower Saving Light Weight Installing the Monitor Connecting the Speaker Connecting the Microphone Connecting Headphones Connecting USB Devices Control Panel Setting up and Using the DV180Using Your Monitor for the First Time Microsoft Windows Automatic Image Adjustment Brightness Hot Key Using the On Screen DisplayContrast Hot Key Return On Screen DisplayContrast Brightness Geometry Menu Colour Adjustment Miscellaneous Return To adjust the image Manual Display Setup Dot Clock Remark Actual Frequency Display KHz MHz Resolution Supported Graphics Signals and TimingsPage Troubleshooting Troubleshooting and Useful HintsPage Need More Help? Specifications New Zealand Contacting Mitsubishi ElectricAustralia