Setting up and Using the DV180 4
The Control Panel
Adjust.
Wheel
Auto
Power Switch: Turns the monitor on or off.
AutoKey: Automatically adjusts the display’s colour temperature, Horizontal Position, Vertical Position, Clock Phase and Pixel Clock.
Adj. (Adjust) Wheel: Rotate and press this to access the On Screen Display (OSD).
Audio Volume Control: (at the rear of the monitor) rotates to adjust the audio volume
Using Your Monitor for the First Time
When the DV180 monitor is first installed the display must be adjusted to give optimal performance. For best performance set the PC’s graphics card to a resolution of 1280 x 1024 pixels before adjusting the monitor. A refresh rate of 75 Hz is recommended.
If you are using Windows 95, 98 or 2000 you will be prompted for the Windows driver files the first time that you use the monitor. These files are also included on the diskette. Place the diskette in the PC’s floppy disk drive and click OK to install them.
10
