Mitsubishi Electronics HC4900 user manual Menu operation, EN-24

Menu operation

• Menus are not displayed when no signal is supplied to the projector.

IMAGE

INSTALLATION

GAMMA MODE	AUTO, SPORTS, VIDEO, CINEMA
	USER1	REFERENCE	SPORTS, VIDEO, CINEMA
	USER2	ADJUST MODE	ALL, RED, GREEN, BLUE
CONTRAST	±30	HIGH	±10(R) ±10(G) ±10(B)
BRIGHTNESS	±30	MID	±10(R) ±10(G) ±10(B)
COLOR TEMP.	HIGH BRIGHTNESS	LOW	±10(R) ±10(G) ±10(B)
	COOL	CONTRAST R		±60
	MEDIUM
		CONTRAST G		±60
	WARM
		CONTRAST B		±60
	USER
		BRIGHTNESS R		±60
COLOR	±10
		BRIGHTNESS G		±60
TINT	±10
		BRIGHTNESS B		±60
SHARPNESS *1	±5
ADVANCED MENU	OK	VERTICAL LOCATION		±26
AV MEMORY SAVE	AV MEMORY1	AUTO IRIS		AUTO IRIS 1, AUTO IRIS 2,
	AV MEMORY2			AUTO IRIS 3, OPEN
	AV MEMORY3	NOISE REDUCTION*1		ON , OFF
		CTI	*1	0 - 5
		INPUT LEVEL		±5
LAMP MODE	STANDARD, LOW			(for analog signal input)
				ENHANCED/NORMAL
AUTO POWER ON	ON , OFF
				(for digital signal input)
AUTO POWER OFF	OFF, 5, 10, 15, 30, 60min
SPLASH SCREEN	ON , OFF
BACK COLOR	BLUE, BLACK
IMAGE REVERSE	OFF, MIRROR, INVERT, MIRROR INVERT
TRIGGER OUT	ON , OFF	ZOOM/FOCUS LOCK		ON, OFF
TEST PATTERN	CROSS HATCH	LENS SHIFT LOCK		ON, OFF
LENS LOCK	OK	LENS SHIFT RESET		OK

FEATURE

SIGNAL

INFORMATION

ASPECT PASSWORD FUNCTION

MENU POSITION

MENU DIMMER

CINEMA MODE *2

VIDEO SIGNAL *3

SETUP *1

SCART INPUT *8

LANGUAGE

RESET ALL

HORIZ.POSITION*6

VERT.POSITION *6

FINE SYNC.*5, *6

TRACKING *1, *5, *6

COMPUTER INPUT *5

OVER SCAN

HOLD *5, *6

USER

LAMP TIME(LOW)

INPUT

RESOLUTION

VERTICAL FREQUENCY

HORIZONTAL FREQUENCY

SYNC. TYPE *5, *6

AUTO, 4:3, 16:9, ZOOM1, ZOOM2, STRETCH			*4
DISPLAY INPUT	, MENU ACCESS	LOCK		OK
1 (Upper left), 2(Lower right)		UNLOCK		OK
ON, OFF
AUTO , VIDEO, FILM

AUTO , NTSC , PAL , SECAM, 4.43NTSC, PAL-M, PAL-N, PAL-60

AUTO, OFF, 3.75%, 7.5%

ON, OFF

, English, Español, Deutsch, Français, Italiano,					,	,	, PORTUGUÊS
OK
0 - 999	*4
0 - 999	*4
0 - 31
0 - 9999	*4
AUTO, RGB, YCBCR / YPBPR
100 - 90%	*4
OFF			BEGIN		0 - 99
ON			END		0 - 99
OK		CLAMP POSITION *5, *6			1- 255		*4
		CLAMP WIDTH *5, *6			1- 63		*4
		VERT.SYNC			AUTO, OFF
			LPF	*6, *7	ON, OFF
		SHUTTER(U)			0 - 32
		SHUTTER(L)			0 - 32
		SHUTTER(LS)			0 - 95
		SHUTTER(RS)			0 - 95

*1: Not available with certain signals.

*2: Available only when the input signal is TV50, TV60, 480i, 576i or 1080i.

*3: Available only when the input signal is from the VIDEO IN or S-VIDEO IN terminal.

*4: Setting range differs depending on the input signals.

*5: Not available when the input signal is from the VIDEO IN or S-VIDEO IN terminal.

*6: Not available when the input signal is from the HDMI IN or DVI-D(HDCP) IN terminal.

*7: Available only when the input signal is 480i, 480p, 576i, or 576p.

*8: Available only when the input signal is from the COMPUTER IN/COMPONENT VIDEO IN terminal.

*9: Available only when the input signal is 480i, 480p, 576i, 576p, TV60 or TV50.

EN-24