EN-4

Preparation/SetUp (continued)

Select a folder to install the program, and click Next.

Click Next.

Installation starts.

•The progress of the installation process is displayed as shown on the right.

When the installation process is completed, click Close.

How to remove Mitsubishi Projector Control Device Installer

Select [Start] - [Control Panel] - [Add or Remove Programs] - [Mitsubishi Projector - Control Device Installer] and click [Remove] (in the case of Windows® XP).

Page 4

Image 4

Mitsubishi Electronics HL650U user manual EN-4, How to remove Mitsubishi Projector Control Device Installer

Contents

LAN Control Utility Contents Preparation/SetUp Preparation before using the network functionMajor functions System requirements Installation Preparation/SetUpConnection EN-3 How to remove Mitsubishi Projector Control Device Installer EN-4 Setting the IP address of the projector EN-5 When using a Dhcp server EN-6 When not using a Dhcp server EN-7 Telnet setting EN-8 Setting the display language of ProjectorView language Setting the password Password SetupEN-9 Setting the PJLink certiﬁcation PJLink certiﬁcation Mode Setting the LAN control LAN-Controlled ModeEN-10 Save and exit EN-11 Using the ProjectorView How to start upProjectorView EN-12 ProjectorView main screen ProjectorViewEN-13 Mail notiﬁcation function ProjectorView Virtual Remote controllerEN-14 ProjectorView Initial setting EN-15 Support for the PJLink function EN-16 Terms and deﬁnitions Support for the PJLink functionEN-17

Mitsubishi Electronics HL650U EN-4, How to remove Mitsubishi Projector Control Device Installer

Models: HL650U

Preparation/SetUp (continued)

How to remove Mitsubishi Projector Control Device Installer

EN-4