Preparation/SetUp (continued)
Save and exit
1
Enter “9” and press the Enter key.
2
The setting screen is shaded and the setting process completes.
•Because the password, display language, LAN control, and PJLink™ certification are set using the telnet function, you can also set them on the command prompt window of the personal computer. Enter the following command and press the Enter key.
>telnet [IP address you set] 9999 [“>” shows a prompt.]
When setting menu appears, perform the setting procedure as described above.
(Note)
Check that the port number “9999” isn’t blocked by the firewall.
