Mitsubishi Electronics HL650U Preparation/SetUp, Preparation before using the network function

Preparation/SetUp

Preparation before using the network function

This projector is equipped with the network function to control and monitor the projector’s operations using a Web browser and to send e-mail notification.

Before using the network function, perform the following three preparation steps.

(1)Setup of the application software “Projector-Control Device Installer”

(2)Setting of the IP address of the projector *1

(3)Setting of password, display language, LAN control, and PJLink™ certification using telnet.

*1	When setting IP addresses for multiple projectors collectively or when setting an IP address for a ceiling-
	mounted projector after installation, check and take a note of combination of the projectors and the hardware
	addresses (MAC addresses) in advance. To check the hardware addresses (MAC addresses), perform step 2
	on the page 5.

[Major functions]

Setting of the projector’s IP address

Setting of password, display language, and LAN control

PJLink™ certification setting (Telnet function)

Startup of the controlling / supervising tool (ProjectorView) using the Web browser

[System requirements]

Supported OS	: Windows® 2000, Windows® XP
	(Microsoft® .NET Framework 1.1*2 should be installed.)
CPU	: Pentium II 233 MHz or higher
Memory	: 128 MB or more
Free HDD space	: 32 MB or more
Web browser	: Internet Explorer Ver. 6.0
	(Java Plug-in*3should be installed and JavaScript should be enabled.)

*2 How to install Microsoft® .NET Framework Version 1.1

(1)Download .NET Framework Version 1.1 (file named “dotnetfx.exe”) from the download center on the Microsoft® Web site (http://www.microsoft.com/downloads/).

(When the file is unavailable from the above-mentioned URL, search for .NET Framework using Windows Update and access the download site found.)

(2)Execute the downloaded file named dotnetfx.exe.

*3 How to install Java Plug-in

(1)Download J2SE v1.4.2 JRE from the JAVA download center on the Sun Microsystems Web site (http://java. sun.com/j2se/1.4.2/download.html).

(When the file is unavailable from the above-mentioned URL, search for “J2SE download” using a search engine and access the download site found.)

(2)Execute the downloaded file.

(3)After the completion of the installation, select [Start] - [Control Panel] - [Java Plug-in] and disable the cache.

•Microsoft or Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

•Pentium is trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other countries.

•The trademark of PJLink is trademark applied for registration or registered trademark in Japan, the United States, and other countries and areas.

•Other brand or product names are trademarks or registered trademarks of their respective holders.

EN-2