Setup for Input Signals

Signal menu

Notes:

“Signal” setup menu displays a different setting condition for each input signal.

Depending on the input signal type, an optional Terminal Board may be required.

Select “Signal” in “Setup” menu and press button.

For Video (S VIDEO)

For RGB

Signal

 

[ AV ]

Signal

 

[ RGB ]

3D Y/C Filter (NTSC)

On

Sync

 

Auto

Colour system

 

Auto

Cinema reality

 

Off

Cinema reality

 

Off

XGA Mode

 

Auto

Noise reduction

 

Off

Noise reduction

 

Off

 

 

 

H-Freq.

63.98

kHz

 

 

 

V-Freq. 60.02 Hz

For Component

 

Signal Format

1280×1024/60i

 

For Digital

 

 

Signal

 

[ Component ]

 

 

 

Signal

 

[ Digital ]

 

 

 

 

Sync

 

Auto

Cinema reality

 

Off

Cinema reality

 

Off

 

XGA Mode

 

Auto

HDMI Range

 

Auto

Noise reduction

 

Off

Noise reduction

 

Off

H-Freq.

63.98

kHz

H-Freq.

63.98

kHz

V-Freq.

60.02

Hz

V-Freq.

60.02

Hz

Signal Format

1280×1024/60i

Signal Format

1280×1024/60i

• 3D Y/C Filter (NTSC)

This menu is displayed when BNC Dual Video Terminal Board (TY-FB9BD) is installed to the unit. Set this menu when the moving image looks unnatural during Video (S Video) input signal.

On Off

Note:

When On, this setting only affects NTSC input signals.

• Colour system

AutoPALSECAM M.NTSC NTSC

Set the colour system to match the input signal. When “Auto” is set, Colour system will be automatically selected from NTSC/PAL/SECAM/M.NTSC.

To display PAL60 signal, select “Auto” or “PAL”.

If the picture image becomes unstable:

With the system set on Auto, under conditions of low level or noisy input signals the image may in rare cases become unstable. Should this occur, set the system to match the format of the input signal.

• Cinema reality

When “On”, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which are recorded at 24 frames per second.

If the picture is not stable, turn the setting to “Off”.

On Off

Note:

When On, this setting only affects the following signal input:

NTSC / PAL signal input during Video (S Video) input signal.

525i(480i), 625i(575i), 1125(1080)/60i signal input during “Component” input signal.

XGA Mode

This menu is displayed when the input signal is analog (Component/PC). This unit supports three types of XGA signals with 60Hz vertical frequency having different aspect ratios and sampling rates (1,024 × 768 @ 60Hz, 1,280 × 768 @ 60Hz and 1,366 × 768 @ 60Hz).

Auto 1024×768 1280×768 1366×768

Auto: Automatically selected from 1024×768/1280×768/1366×768.

Switch the setting to suit the input signal for better display depends on the angle of view or display resolution condition.

Note:

After making this setting, be sure to make each adjustment (such as “Auto Setup”) on the “Pos./Size” menu as necessary. (see page 23)

47

Page 47
Image 47
Panasonic TH-50PB2W, TH-65PB2W operating instructions Signal menu, Setup for Input Signals