Mitsubishi Electronics PAC-YG31CDA Windows Elements, Open/Close file, Get/Put system settings

8.3 Windows Elements

The initial setup screen of SetBACnet is shown below.

Title bar:

Show the title of the window.

Menu bar:

Show a list of function that may be selected.

G-50A Tab:

Sets the unit configuration in BACnet IF.

System Tab:

Set the extended functions.

BACnetTab:

Sets the parameter of the BACnet communication.

8.4 Open/Close file

The File menu contains items that allow you to start creating a file, save changes in your system setting, and exit BACnetIF. The made file is used for the backup of the system etc.

[File] menu	Contents
[New Settings]	Open a new empty file
[Open Settings]	Open a pre-existing file
[Save Settings]	Save the current file (*.dat)
	If you have not edited the file since you last saved, then a new empty file will appear in the
	Main Window.
	If you have edited the file since you last saved, then dialog boxes will open prompting you to
	save the changes.
[Save Settings As]	Save the current file under a new file name (*.dat)
	The dialog box with a suggested file name will appear.
[Exports]	Export is done to the CSV file.
[Properties]	IP address of PC to which BACnetIF is set up is input.
	[127.0.0.1] is input when set up to PC, as which BACnetIF and a setting tool are the same.
[Exit]	THE BACnetIF program is ended.

8.5 Get/Put system settings

The [BACnetIF] menu contains the item that you forward the system set up information to BACnetIF, and acquires it from BACnetIF.

[BACnetIF] menu	Contents
[Get Settings]	The system set up information is acquired from BACnetIF. (*1)
[Put Settings]	The system set up information is forwarded to BACnetIF. (*1, *2)

*1 Internet Protocol address at the forwarding destination (acquisition source) is set with Properties of the File menu. *2 Please restart BACnetIF, when a function and a system configuration are changed.

BACnet IF reads setting information at once at the time of starting.

23