(2) Modify notification address
Click the [Modify] button. The [Notification Address] screen will open.
(3) Delete notification address
Click the [Delete] button. The confirmation screen will open.
Item Contents Set value
IP Address Input the IP address to notify. The devices, which communicate on
BACnet makes a network address the same
setup.
Process Identifier The number, which discriminates a
notification setting.
Initial setting: Blank (no setting)
Range: 1 to 99999999
Notification Type Event not notifications may be specified to
use either confirmed or unconfirmed services
for notification messages.
Unconfirmed: BACnet IF does not wait for
acknowledgement (response) of the
notification message.
Confirmed service: BACnet IF waits for
acknowledgement (response) of the
notification message.
8.8.2.2 EVENT Notification Setting
The notification class and address of EVENT notification, and setting the parameter of notification.
Notification Class ID can specify a maximum of 10 ID and a maximum of 10 addresses for every Notification
Class ID.
Select the [Event Notification Settings] tab. The [Notification Setting] screen will open.
Notification Class Setting
Notification Address Setting
29