8.8.2 Notification Setting
BMS carries out the monitor of t he state, in order to know the state of Object of BACnetIF.
Notification is the function notified to the BACnet (or Building Automation System), when the value currently
supervised exceeds a limit or it changes to an alarm value. There are COV type and EVENT in Notification.
Item Contents Target object name
COV (Change Of Value)
Notification
Example) When the [RoomTemp] value
currently supervised changes, BACnet IF
send a COV notification message to the
BMS.
All
Except for
Notification Class and Device
EVENT Notification When the decided spec ific conditions are
satisfied, it announces to a BMS.
Example1) When the [Alarm Signal] value
currently supervised changes to the alarm
value, BACnet IF send a notification
message to the BMS.
Example 2) When the [RoomTemp] value
currently supervised exceeds a limit,
BACnet IF sends a notification mes sage to
the BMS.
All
Except for
Notification Class and Device
8.8.2.1 COV notification setup
The destination address of a COV notification message is setup.
The number of the address, which can be registered, is to 10.
Select the [COV Notification Settings] tab.
COV No.
Set the number
of COV
notification.
(1) Add COV notification address
Click the [Add] button. The [Notification Address] screen will open.
28