Mitsubishi Electronics SE2U Controls and Functions, External Control Panel, 3. 3 Left 4. Right

Controls and Functions

External Control Panel

9

5 3

1

2

6

13

12

10

11

4

8

7

1.Power (Refer to pages 17 and 18 for more information.)

Turns the projector on or off.

2.SOURCE (Refer to page 20 for more information.)

Sequentially selects the input signal RGB/YPbPr, Video or S-Video.

3.3 Left

4.Right 4

When the on-screen menu is not activated, #3 and #4 function as Keystone -/+hot keys.

(Refer to page 19 for more information.)

5.5EXIT

Exits and saves the menu settings.

6.6MENU

Turns the on-screen display control menu on.When the on-screen menu is activated, the #3 to #6 buttons are used as directional arrows to select the desired menu items and to make adjustments. Refer to page 24 for more information.

7.AUTO POSITION (Refer to page 20 for more information.) Automatically determines the best picture timings for the displayed image.

8.MUTE (Refer to page 21 for more information.)

Used to hide the screen image and disable the audio. You can press Mute again to bring the image and audio back.

9.POWER indicator light

Lights up or flashes when the projector is under operation.

10.TEMP (Temperature) warning light (Refer to page 34 for more informa- tion.)

Flashes red if the projector’s temperature becomes too high.

11.LAMP indicator light (Refer to page 32 for more information.)

Indicates the status of the lamp. Lights up or flashes when the lamp has developed a problem.

12.Zoom ring

Adjusts the size of the image.

Rotate clockwise to enlarge the image or rotate counter-clockwise to make the image smaller.

13.Focus ring

Adjusts the focus of the projected image.

8 Introduction