Mitsubishi Electronics SL1U user manual Specifications

Specifications

Type	LCD projector
						ENGLISH
Model	SL1U
Rated power supply	AC100V - 240V, 50 / 60Hz
Rated input	2.3 A
LCD panels	0.7-inch LCD panel: 3 pieces (for R, G, B)
	Pixels	800 ⋅ 600 = 480,000 pixels
	Total	1,440,000 pixels
	Active pixel rate: 99.99 % or more (each panel)
Colors	16,770,000 colors
Projection lens	F 1.9 - 2.2 f = 27.0 mm - 32.0 mm
Light source lamp	150 W NSH
Picture size	30 inch - 300 inch (aspect ratio 4:3)
PC compatibility	Resolution : 640 ⋅		400 - 800 ⋅ 600 + Compressed 1024 ⋅ 768
	Sync on Green available
Video compatibility	NTSC / NTSC 4.43 / PAL (including PAL-M, N) / SECAM, PAL-60
	DVD (Component) / HDTV (1080i) / 720p / (525p)
Audio output	1 W mono
Speaker	Rundo type (8Ω 1W)
S-video input	Luminance signal: Vp-p=1.0V 75Ω			(negative sync.)
	Chroma signal: Vp-p=0.286V 75Ω			(burst signal)
Video input	Vp-p=1.0V 75Ω		(negative sync.)
Audio inputs	350 mVrms, 10kΩ		or more
Analog RGB input	RGB: Vp-p=0.7V 75Ω (negative sync.)
(mini D-SUB 15P)	YCBCR: Y: Vp-p=1.0V (negative sync.)				CBCR: Vp-p=0.7V
	HD/CS : TTL level (positive or negative)
	VD : TTL level (positive or negative)
Control connector	Round (DIN 8 pin female connector) RS-232C standards
Outside dimensions	237 mm ⋅	94 mm ⋅ 315 mm (9.3 inch ⋅			3.7 inch ⋅ 12.4 inch)
	(width ⋅	height ⋅	depth)	Legs and lens are included.
Weight	Approx. 2.9 kg (6.5 lbs)
Length of power cord	2.9m (9.5 feet)
Temperature, humidity	+41° F (+5° C) - +95° F (+35° C), 30 - 90%
(performance guarantee)

Kensington Lock

This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the Kensington System for instructions on how to use it to secure the projector. Please contact to Kensington Technology Group as shown below.

Kensington Technology Group

2855 Campus Drive

San Mateo, CA 94403, U.S.A.

Phone : (650)572-2700 Fax : (650)572-9675

EN – 25