![](/images/new-backgrounds/1269080/26908031x1.webp)
Menu operation (continued)
1IMAGE
CONTRAST ......... Adjusts the picture contrast. The contrast becomes higher as the | opt. |
|
|
| XGA60 |
number increases. |
|
|
BRIGHTNESS ..... Adjusts the image brightness. The image becomes brighter as | IMAGE |
|
the number increases. | CONTRAST | 0 |
sRGB .................... Select ON to display an image emphasizing on the color | BRIGHTNESS | 0 |
reproducibility. | sRGB | OFF |
• When sRGB is ON, COLOR MATRIX, can’t be adjusted. | COLOR MATRIX | COMPUTER |
•When sRGB is ON, the image will become darker.
STANDARD
•When COLOR TEMP is set to other than STANDARD
|
| COLOR | 0 |
| while sRGB is ON, colors won’t be reproduced as per |
|
|
|
| TINT | 0 |
| the standard value of sRGB. |
|
|
|
| SHARPNESS | 0 |
| • Though sRGB can be ON while a signal is input from |
|
|
|
|
| |
| in accordance with the sRGB standard value. Use sRGB to suit your color preference. | ||
COLOR MATRIX | Adjusts the color balance in each color of the image. See page 18. |
|
|
COLOR TEMP | Adjusts the color temperature. See page 18. |
|
|
COLOR | Adjusts the color intensity of the image. (Available only when VIDEO is selected as the source.) | ||
TINT | Adjusts the color balance of the image. The color balance of the image shifts green as the number | ||
| increases and shifts to purple as the number decreases. (Available only when VIDEO is selected as the | ||
| source.) |
|
|
•When the TV50 (PAL, SECAM) signal is inputted, TINT can’t be adjusted. SHARPNESS ....... Adjusts the image sharpness. The image sharpness rises as the number increases.
2INSTALLATION
IRIS ...................... Adjusts the sensitivity of the function (IRIS) which |
|
|
| opt. |
|
|
| XGA60 |
automatically adjusts the brightness and contrast of the image |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
depending on the degree of the light in the room. When using | INSTALLATION |
| ||||||
this projector in a room where the light and shade varies |
|
| IRIS | OFF | ||||
slightly, select 1. When using this projector in a normally |
|
| KEYSTONE | 0˚ | ||||
lighted room, select 2. When using this projector in a room |
|
| AUTO POWER | OFF | ||||
where the light and shade varies greatly, select 3.When you |
|
| ON |
| ||||
|
| AUTO POWER | OFF | |||||
select OFF, IRIS won’t operate. |
|
| OFF | |||||
|
| SPLASH SCREEN | ON | |||||
| ON | |||||||
• When the sensitivity is adjusted in a large amount, the |
|
|
|
|
|
|
|
|
image may be displayed solid white. Adjust the |
|
| BACK COLOR | BLUE | ||||
|
| |||||||
|
|
|
|
|
|
|
| |
sensitivity depending on the operating environment |
|
| LAMP MODE | STANDARD | ||||
and imges to be displayed. |
|
| IMAGE REVERSE | OFF | ||||
|
|
|
|
|
|
|
|
|
KEYSTONE ......... Corrects keystone distortion. Select an optimum value for
proper display. For normal use, select 0˚.
AUTO POWER ON ...... Select ON to boot up the projector automatically by turning on an externally connected power switch
such as a breaker even when the main power switch of the projector is off. Use this setting when the projector is hanging from the ceiling.
| • The projector will be in the |
| on the lamp. |
AUTO POWER OFF .... | Set the time elapsed before the projector enters into the |
| inputted from the selected source. |
SPLASH SCREEN | Select ON to display the splash screen when the power is turned ON. |
BACK COLOR | Use to select the color of the background, blue or black, which will be displayed when there is no signal |
| inputted from the selected source. |
LAMP MODE | Use to change the brightness of the lamp. When LOW is selected, the image will become darker, |
| though the power will be saved, operating sound will be reduced. |
•The brightness of the lamp will be STANDARD for 3 minutes regardless of the setting of the LAMP MODE when the lamp turns on.
•When the LAMP MODE is changed, the screen may flicker. This is not a failure of the lamp. IMAGE REVERSE ...... Use to reverse or invert the projected image. Select MIRROR in rear projection. Select MIRROR,
INVERT in rear projection with the projector hanging from the ceiling.
3FEATURE
MENU POSITION ....... Use to select the position of the menu on the screen, (upper
left) or (lower right).
EXPAND MODE .. Select the mode for enlarging screen. See page 20.
AUDIO MODE ..... Select COMPUTER to output the sound which is inputted to
the audio input terminal when COMPUTER is selected as the
opt.
FEATURE
MENU POSITION
AEXPAND MODE
A
XGA60
1.
1.
source. Select VIDEO to output the sound which is inputted to the audio input terminal when VIDEO is selected as the source. Select COMPUTER VIDEO mode to always output the sound which is inputted to the audio input terminal. Select MUTE not
?
AUDIO MODE
VIDEO SIGNAL
ANAMORPHIC
COMPUTER
VIDEO
AUTO
OFF
to output the sound at all.
AË LANGUAGE
RESET ALL
English
OK
EN – 16