Mitsubishi Electronics VS-45607 manual Resetting the Factory Defaults, To televmson viewing

The Advanced Features Menu, continued

Advanced Convergence

Before you can adjust theAd- vanced Convergence, you must

adjust the Static Convergence for both Red and Blue.

I.PressA ),V or • to move the flashing bracket to a position that needs adjustment. Press E_R tO stop the flashing and begin the adjustment.

2.Press • I_v or • to move the red or blue line. A

position is converged when all three lines combine to make a white line,

ENTER

3.Press _ when aligned and the bracket will flash again. You may now repeat steps I-3 until you are satisfied with the grid alignment.

VIDEO	to alternate between red and blue.
4. Press _

MENU

5. To exit, press O to return to the previous menu

HOME

or O to return to television viewing.

Resetting the Factory Defaults

MENU

L Press _ to display the Main Menu.

ZPress• or• to select Advanced Features. Press E_R.

ENTER

. PressAor• to select Convergence. Press _.

PressA or • to select Reset Factory Default. PressE_ R. The message "Convergence reset completed" will display when the defaults are

reset-

5.		MENU	to return to the previous menu
	To exit, press _
	HOME		....
	or _	to return	to televms_onviewing.

IMPORTANT

There are more than 64 line

intersections. However, the

bracket will only stop on the 64 adjustment positions.

44