Remote Control of the Active AV Network
The AV Network is a special feature that makes it easier to use your television and other Mitsubishi A/V components together. When you connect the AV Network, you can point the remote control at the television, and it will pass the remote control command to other components. You will gain even more benefits if you have a Mitsubishi VCR equipped for the Active AV Network and a Mitsubishi DVD player.
Before you begin, be sure you have:
Made the correct AV Network connections. Refer to "'Connection of TV to the
Active AV Network"in the Connections section.
Connected yourVCR to
DVD INPUT.
Set yourVCR's remote control settings toVCR.
Turned yourVCR video mute setting on.
Turned the Active AV Network feature in the VCR and the TV'smenu to ACTIVE.
Using the PLAY key on the remote, after selectingVCR with the slide switch:
Active AV Network will turn yourVCR on and begin playing a tape (if tape is inside).
Active AV Network will turn yourTV on and switch it to
When you turn your TV off, yourVCR will turn off, unless it is playing or record-
ing.
Displaying theVCR menu
When you set the remote toVCR and then press MENU:
•Active AV Network will turn on yourVCR if it is off and display theVCR's menu (this function may not work with some older MitsubishiVCR's).
•Active AV Network will turn on yourTV if it is off and switch it to INPUT- I.
Using the PLAY key on the remote, after selecting DVD with the slide switch:
Your remote must be programmed to operate Mitsubishi DVD players. Active AV Network will turn on your TV and switch it to DVD INPUT.
If your DVD player is in range of the remote and has a disc inside, the DVD will turn on and the disc will begin playing.
IF ,MPORTANT11
When using the Active AJV Network, always point I
your remote contro at your te ev s on.
53
