Mitsubishi Electronics VS-45607 Connection ofTV toVCR and Cable Box, Audio Video Connections

Connection ofTV toVCR and Cable Box

I. Connect the incoming cable toANT-A on the TV back panel.

2. Connect three coaxial cables as follows:

TV Back pan_

©

•One from CABLE LOOP-OUT on the TV back panel to IN on the back of the cable box.

•One from OUT on the back of the cable box to ANTENNA IN on the VCR back panel.

•One from ANTENNA OUT on the VCR back panel to ANT-B on the TV back panel.

®

.... ®®

ANT_ L_OUT ANT,B

®®

©

VCR Back panel

If your VCR has a video chant=el ON/OFF sw_tch_ set it to OFF,

Audio Video Connections

I. Connect a video cable fromVIDEO

OUT on theVCR back panel toVIDEO INPUT I or INPUT 2 on theTV back

panel.

If you have a S-VHSVCR, follow the same steps, using the S-Video terminals on the VCR and TV.

2.Connect a set of audio cables from AUDIO OUT on theVCR back panel to AUDIO INPUT on the TV back panel. The red cable connects to the R (right) channel and the white cable connects to the L (left). If yourVCR is non-stereo, connect only the L (left) cable.

TV _ck P_e_

_	F_CA pin-ly
	video caSe_
RCA	A_tac_
	only
cab_	cat_e
VCR _ck pa_el	type
type	cable

If your VCR has a video channel

ON/OFF s_wltch, set it to OFF,

10