MODELS:
52” & 62” Models OPTICAL ENGINE REPLACEMENT (Details)
17) Be sure not to misplace spring | 18) Remove (1) screw from plate |
| (A), (4) screws from fan (B), (2) |
| screws from side lock (C) and (2) |
| grounding strap screws (D) |
C
D
Spring
A
B
19)Transfer LENS COVER from service part to defective part
Reassembly:
1) Attach LENS CUSHION BASE to Engine
Lens Cushion Base
Follow above steps in reverse order
TIP: Lift and group wiring on left side of engine when installing
Mechanical Alignment: Adjustment is required after engine has been removed. Please follow steps in the adjustment section of this manual.
Data: Index Delay Data needs to be transfered from Engine to E2P PWB: < MENU + 2457 + 0 >
Select
Page 33
