1. Television Overview 9
TV Back Panel1. ANT 1/MAIN, ANT 2/AUX (Antenna)
If you are connecting an antenna or direct cable with out
a cable box, connect the main antenna or cable sourc e
to
ANT 1/MAIN
. Use
ANT 2/AUX
for a secondary source.
ANT 1/MAIN
and
ANT 2/AUX
can each receive digital
and analog over-the-air channels from a VHF/UHF
antenna or non-scrambled digital/analog c able source.
2. COMPONENT Inputs (Audio a nd Video)
Y Pb Pr (480i/480p/ 720p/1080i)
Use these jacks to connect devices with component
video outputs, such as DVD players, external HDT V
receivers, or compatible video game systems. S ee
Appendix A specifications for signal co mpatibility.
3. PC/DVI AUDIO INPUT
Use the
PC/DVI AUDIO INPUT
when connecting a DVI
device to one of the TV’s HDMI inputs using a DVI-to-
HDMI cable. These jacks allow you to send left and
right analog audio from your computer or other DVI
device to the TV.
4. AVR AUDIO OUTPUT
Use
AVR AUDIO OUTPUT
to send analog audio of the
program currently shown on the screen to an A /V sur-
round sound receiver or stereo system. Digital audi o
from digital channels and HDMI devices is conver ted to
analog audio by the TV. If using an analog A/ V receiver
or stereo system, this is the only audio connection
needed between it and the TV.
ANT 2 / AUX
ANT 1 / MAIN
ANT 2/ AUX
ANT 1 / MAIN
ANT 2 / AUX
ANT 1 / MAIN
INPUT 1
INPUT 2
L (MONO) R
AUDIO
DIGITAL
AUDIO
OUT HDMI 12
YPb Pr
AVR
AUDIO
OUTPUT
S-VIDEO VIDEO
3
L (MONO) - AUDIO - R
Y Pb Pr (480i/480p/720p/1080i)
VIDEO: 480i /480p /720p /1080i /1080p
AUDIO: PCM STEREO
PC: VGA / W-VGA / SVGA / W-SVGA /
XGA / W-XGA / SXGA / 720p /1080p
IR EMITTER
NetCommandR
PC/DVI
AUDIO
INPUT
COMPONENT 1
COMPONENT 2
ANT 2 / AUX
ANT 1 / MAIN
1
2
3
4
5
6
7 8
IR Emitter Jack included
on Y series and 734 series
models only.
Third HDMI input available on
Y, 733, and 734 series models.