Mitsubishi Electronics WD-65733, WD-57734 Photos and Moving Video as Composite Video, Slide Show

4. TV Operation and Features 33

Slide Show

Use these keys during the slide show:

Keys for JPEG Picture Slide Show

Begin or resume slide show playback

Pause or resume playback while in auto- matic advance mode.

or	Advance to the next slide.
ENTER

Go to the previous slide.

FORMAT Rotate the slide clockwise in 90˚ incre- ments.

Stop slide show and display the USB Photo menu.

INFO Display status for the viewing device and current image.

INPUT Display the Input Selection menu.

MENU Display or remove the TV Main menu.

Note: Always press (STOP) to stop slide show play- back before disconnecting from the USB Photo port.

Media Setup Menu

Media Setup menu

In the Media Setup menu you can adjust the slide show display, number of repetitions, or display interval.

•Select either Auto or Manual advance. During

manual operation, press or ENTER to advance to the next slide.

•For automatic advance, select the number of times (frequency) to play the complete slide show: Once, Twice, or Continuous.

•For automatic advance, select the time interval for display of each slide. The interval you select here is the minimum time between slides; actual time may be longer for larger files.

•Press EXIT to close the Media Setup menu and return to the USB Photo menu.

IMPORTANT

The TV can read JPEG files as created by the camera. If you edit a picture file on a computer and resave the image, the TV may be unable to read the resaved file.

USB Photo Menu Compatible Picture Files

•Still images recorded on digital cameras using the Exchangeable Image File Format, version 2.1 (EXIF 2.1) standard for digital still cameras and Design Rules for Camera File Systems version 1.0 (DCF 1.0)

•Some images opened and resaved on a computer may not play back or may not display in the thumb- nail list. This happens if the files were resaved in an incompatible format.

•Full path file names can be no longer than 50 char- acters and must end in a .jpg extension. Not all 50 characters will display.

•Images on storage devices with a capacity of over 256 MB can take a longer initial time to display.

Photos and Moving Video as Composite Video

Connect the camera to the TV using a composite video cable if:

•You are unable to see images using the USB photo port.

•You wish to view moving video from the camera.

The TV’s USB Photo menu will be unavailable and you must control the slide show through the camera. Display resolution is standard-definition (480i).

1.Refer to the owner’s manual supplied with the camera for instructions needed for this setup.

2.Set the camera’s output signal type to NTSC and put the camera into playback mode.

3.With the camera still turned on, connect your digital camera’s composite video cable (usually yellow) to the INPUT 3 VIDEO/Y jack on the front of the TV. To hear audio, connect the camera’s audio output cable to the INPUT 3 L-AUDIOjack.

4.When the Auto Input Sensing screen displays, press EXIT or assign the name Camcorder.

5.Press INPUT to display the Input Selection menu.

6.Highlight the icon for the camera input and press ENTER.

7.If viewing photos, advance through the images manually or set the camera to advance automatically.

$PNQPTJUF
7JEFP
$BCMF

0QUJPOBM
"VEJP
$BCMF

		I
		N
		P
		U
L-AUDIO-R VIDEO/Y Pb	Pr	T	USB
		3

Camera connection using a composite video cable