12 2. TV Setup

Parent menu, the Lock > Front Panel menu,
and Setup > Edit > Lock.
• Video Settings. Change video adjust ments to
get the best picture for your viewing conditions.
See “AV Menu.”
Note: You may wish to change the Picture Mode from
the default Brilliant to either Bright or Natural,
which are suitable for most home viewing envi-
ronments.
2. To program the remote control to operate A/V
devices not under NetCommand control, see
Appendix D, “Programming the Remote Control.”

TV Care

• Lamp Cartridge. When the lamp car tridge
needs replacement, replac e the lamp yourself
and save the cost of a ser vice call. See
Appendix C for instruction s.
• General Cleaning. See the cleaning recom -
mendations under “Impor tant Information
About Your TV.”

Assistance

• For troubleshooting, service, and produc t
support, see Append ix E.
• For warranty information, see the TV warr anty
in the back of this book.
Installing the Remote Control Batteries
1. Remove the remote control’s back cover by gently
pressing in the tab and lifting off the cover.
2. Load the batteries, making sure the polaritie s (+)
and (-) are correct. For best results, inser t the
negative (-) end first.
3. Snap the cover back in place.
2
1
The remote control requires t wo AA alkaline batteries.
Turning the TV On or Off
To turn the TV on or off, point the remote control
at the front of the TV and press the
POWER
button.
Alternatively, press the
POWER
button on the front
panel of the TV.
If You Turn Off the TV by Mistake
1. Pre ss
POWER
again within about 30 seconds,
while the lamp is still hot, to have the TV come
back on immediately.
2. If th e
LAMP
indicator starts blinking (about 30
seconds after you shut off power), wait abou t
one minute for the
LAMP
indicator to stop
blinking and pres s
POWER
to turn the TV on
again.
When You First Power On the TV

Choosing a Language for Menus

1. Power on the TV for the first time.
2. Press to select either English or Spa nish
for all menus. You can later change the language
selection through the Setup menu Languag e
option.
When you first power on the TV, the Welcome screen let s
you change the menu language.
Initial TV Setup
Use the Setup menu for basic TV setup options.
1. Press
MENU
to open the Main menu.
2. Press to highlight the S etup icon and display the
Setup menu.
Setup menu highlighted in TV Ma in menu