Mitsubishi Electronics WD-57833 manual Appendix a Specifications, Ieee 1394 System Compatibility

68Appendices

Appendix A: Specifications

Size, Weight, and Power Consumption

Model				Dimensions (inches)			Weight	Power
	Height				Width	Depth	(lbs.)
WD-57833		35			51.3	13.9	62.4		275
WD-65833		39.5			58.2	15.4	78.0		275
WD-73833		43.6			65.2	17.5	92.6		275
Inputs
Type				Qty.	Input Specifications
Antenna/Cable			2		RF
input					F connector, 75-ohm
HDMI (digital			4		CEA-861D standard for digital audio
video/audio)					and video via HDMI
					HDMI standard connector
					Video:	60 Hz: 480i, 480p, 720p, 1080i
						24 Hz, 30 Hz, 60 Hz: 1080p
					Audio: PCM stereo
					PC (digital signals only):
					VGA (640 x 480, 60 Hz)
					W-VGA (848 x 480, 60 Hz)
					SVGA (800 x 600, 60 Hz)
					W-SVGA (1064 x 600, 60 Hz)
					XGA (1024 x 768, 60 Hz)
					1280 x 720, 60 Hz
					SXGA (1280 x 1024, 60 Hz)
					1920 x 1080 (24 Hz, 30 Hz, 60 Hz)
					WXGA (1360 x 768, 60 Hz))
Composite			3		NTSC 480i only
Video					Video:	RCA Pin Plug, 1.0 V p-p,
						75 ohm
S-Video			2		Four-Pin DIN Plug
					Y: 1.0 Vp-p 75-ohm
					C: 0.286 Vp-p (burst signal), 75-ohm
Component			3		CEA-770.1 & CEA 770.2 480i, 480p,
Video (Y/Pr/Pb)					CEA 770.3 720p and 1080i (TV
					analog component video standards)
					RCA Pin Plug
					Y: 1.0 Vp-p (includes sync),
					75-ohm
					Pr: 700 mV p-p, 75-ohm
					Pb: 700 mV p-p, 75-ohm
USB Photo Port			1		For transfer of JPEG files only.
Audio Inputs			6		Analog left and right audio
				pairs	RCA Pin Plug 500 mV (full scale), 43-k
					ohm
IEEE 1394			2		IEEE 1394 Four-Pin-Type Terminal,
(input/output)					S400
M-Link			1		RS-232 control
Outputs
Description				Qty.	Output Specifications
Audio Speakers				2	5.75" x 2.4"

Outputs

Description		Qty.	Output Specifications
Analog Audio		1	RCA Pin Plug, 500 mV rms + 200 mV
(Signal)		pair	(full scale) for analog sources, 1.5
			Vrms + 0.5 Vrms (full scale) for digital
			sources.
Digital Audio		1	RCA Pin Plug, Signal Type Dolby
Output			Digital, PCM stereo
Record	Video	1	Video: RCA Pin Plug 1.0 Vp-p, 75-ohm
Output			Signal Type: NTSC 480i only
	Audio	1	RCA Pin Plug, 500 mV rms + 200 mV
		pair	(full scale) for analog sources, 1.5
			Vrms + 0.5 Vrms (full scale) for digital
			sources.
3-D Glasses		1	VESA 1997-11 Connector and Signal
Emitter			Standards for Stereoscopic Display
			Hardware

Image Technology			Lamp
DLP, 0.65” chip, 1920 x 1080 pixels with Smooth			180-watt VIP type
Picture™
Channel	Over-the-Air: VHF 2–13, UHF 14–69
Frequency	Analog Cable: 1–125
Reception	Digital Cable: 1–135
	Over the Air:	Analog NTSC, Digital ATSC with
		sub-channels (all 18 video formats)
Channel
		Analog NTSC (non-scrambled)
Type*
	Cable:	Digital QAM 64 and 256 with sub-
		channels (non-scrambled)

*Note for Digital Channels: The channel numbers displayed on screen are determined by the broadcaster or cable company and can vary from the standard frequency number. If there is no channel-number information provided by the broadcaster or cable company, the TV creates a channel number. The created channel number uses the frequency number as the main channel number and the program number as the sub-channel number.

HDMI

The HDMI inputs are compliant with CEA-861D standards for stan- dard, extended, and high-definition video; digital audio, and HDCP copy protection.

IEEE 1394 System Compatibility

•This television is designed to conform to IEEE 1394 AV/C Software standards in effect at the time of development. This networking and control technology is designed

to provide high-performance digital connections and product control, making the product easier to use.

•Mitsubishi D-VHS VCRs are fully compatible with this TV in audio, video, and control.

•As other manufacturers distribute products that use the IEEE 1394 AV/C standards, they will be responsible for developing products that meet the standards of the technology, as well as compatibility testing with other products. Mitsubishi cannot be responsible for their efforts, and therefore cannot promise compatibility with these other products. Any compatibility problems with other manufacturers’ products should be brought to the attention of those manufacturers.