68Appendices

Appendix F: Lamp Cartridge Replacement

CAUTION

BURN DANGER!

During normal operation, the surfaces inside

the TV near the lamp are extremely hot.

TOUCH THE LAMP CARTRIDGE BY THE HANDLE ONLY

Do not touch the glass parts of the lamp cartridge.

CAUTION: If the television is on, press POWER to turn it off and unplug the AC power cord. Allow the television to cool for at least one hour before attempting to replace the lamp car- tridge.

LAMP LIFE

The light source for this television is a lamp, which is part of a lamp cartridge assembly. The actual life of the lamp in this television can vary, based on the lamp itself, the air temperature around the TV while it is operating, and your viewing patterns. Warmer air or poor ventilation shortens the lamp life, as does turning the television on and off fre- quently.

When the end of the lamp’s average life is approaching, the TV displays a warning message for one minute when you power on the TV. The message will reappear the next five times you turn on the TV. If you wish, you may continue to use the current lamp until it stops working. After you change the lamp cartridge, you must reset the lamp reminder through the TV Setup menu. Otherwise, the warning message will appear again earlier than necessary. Mitsubishi warrants the lamp for one (1) year from date of the original purchase at retail. It is likely, however, that the lamp will last significantly longer than this.

TO ORDER A NEW LAMP

To Receive a Replacement Lamp Under Warranty

To Purchase a Replacement Lamp After Warranty

 

 

Call (800) 332-2119. Please have model number,

Call (800) 553-7278. Order lamp part number

serial number, and TV purchase date available.

915P028010.

 

 

WARNING

Do not remove the lamp cartridge immediately after turning off the television. You may get burned because of the lamp’s high temperature. Allow the television to cool for one hour before attempting to replace the lamp cartridge.

Do not remove the lamp cartridge except when replacing it. Careless treatment can result in injury or fire.

Do not touch the lamp glass element. It may be very hot and break, causing injuries or burns.

Be sure not to insert any metal or flammable object into the lamp cartridge opening, as it may cause fire or electri- cal shock. If a foreign object is inserted into the opening, unplug the AC cord of the TV and contact your dealer for service.

Install the lamp cartridge securely. Failure to do so may cause a fire.

Do not touch the lamp glass elements. Oils from your fingers may cause premature lamp failure.

THE LAMP INSIDE THIS PRODUCT CONTAINS MERCURY AND MUST BE RECYCLED OR

Hg = MERCURY DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. For disposal or recy- cling information, please contact your local authorities or the Electronic Industries Alliance:

www.eiae.org

IMPORTANT

Reset the lamp hours through the TV setup menu each time you replace the lamp cartridge. Other- wise, the lamp warning message will reappear sooner than necessary.

Downloaded from www.Manualslib.com manuals search engine

Page 68
Image 68
Mitsubishi Electronics WD-62526 Appendix F Lamp Cartridge Replacement, Do not touch the glass parts of the lamp cartridge