28Appendices

Appendix A: Lamp Cartridge Replacement

Lamp=Cartridge Replacement

CAUTION: If the television

is on, press POWER to turn

it off. Unplug the television

and allow it to cool for at least

one hour

before

attempting

to

 

BURN

DANGER!

HOT SURFACES

INSIDE!

replace

the lamp

cartridge.

 

Touch lamp cartridge handle

only. Do not touch

lamp

or lamp car=

 

 

 

 

 

tridge housing. Keep lamp cartridge horizontal during removal. Do

Lamp

 

 

 

 

not tilt as glass

may come out and cause injury.

Replace lamp car=

The light source for this television is a

 

tridge only with the same part number 915B455011.

 

 

 

 

 

 

 

lamp, which is part of a lamp cartridge

 

 

 

 

 

 

 

assembly. The life of the lamp can vary,

 

 

 

 

 

 

 

based on the lamp itself, the air temperature around the TV while it is operat-

WARNING

ing, the selected lamp mode,

and your viewing

patterns. Warmer air or poor

ventilation

shorten the lamp

life, as does

setting

Lamp Energy

to Bright and

THE ACCESS

PANEL

IS

turning the television

on and off frequently.

 

 

PROVIDED WITH AN

INTERLOCK

Mitsubishi warrants the lamp for one (1) year from the date of original

TO REDUCE THE RISK OF

EXCESSIVE ULTRAVIOLET

TV purchase at retail.

 

 

 

 

 

 

 

 

 

 

RADIATION.

DO NOT DEFEAT

 

 

 

 

 

 

 

 

The lamp cartridge assembly is designed to be replaced by the TV

ITS PURPOSE OR ATTEMPT TO

owner. The cost of labor for a service technician to replace the lamp

SERVICE WITHOUT REMOVING

is not covered by the warranty.

PANEL COMPLETELY.

 

To Order a New Lamp

 

To Receive a Replacement Lamp Cartridge Assembly Under Warranty

Visit our website at www.mitsuparts.com.

Call (800) 553-7278. Please have model number, serial number, and TV purchase date available.

To Purchase a Replacement Lamp Cartridge Assembly After Warranty

Visit our website at www.mitsuparts.com or call (800) 553-7278. Order the following:

Lamp Part Number 915B455011

Lamp-Substitution Alert

MEVSA recommends that you use only genuine Replacement Lamp Assemblies purchased directly from Mitsubishi or a Mitsubishi Authorized Dealer or Mitsubishi Authorized Service Center. MEVSA advises that replacement lamps obtained separately from the Lamp Cartridge and/or Lamp Assemblies obtained from unauthorized sellers may be incorrect for your television, may not fit or perform properly and may even damage your television. MEVSA can not be responsible for the performance, reliability or safety of any replacement lamps that are obtained from unauthorized sources.

WARNING

Do not remove the lamp cartridge immediately after turning off the television. You may get burned because the lamp is very hot. Allow the television to cool for at least one hour before replacing the lamp cartridge.

Do not remove the lamp cartridge except when replacing it. Careless treatment can result in injury or fire.

Do not touch the lamp glass element. It may be very hot and break, causing injuries or burns.

Be sure not to insert any metal or flammable object into the lamp cartridge opening, as it may cause fire or electrical shock. If a foreign object is inserted into the opening, unplug the AC cord of the TV and contact your dealer for service.

Install the lamp cartridge securely. Failure to do so may cause a fire.

Do not touch the lamp glass elements. Oils from your fingers may cause premature lamp failure.

THE LAMP INSIDE THIS PRODUCT CONTAINS MERCURY AND MUST BE RECYCLED OR DIS-

(_= MERCURY POSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. For disposal or recycling infor- mation, please contact your local authorities or the Electronic Industries Alliance at www.eiae.org

For assistance call 1(800} 332-2119

Page 28
Image 28
Mitsubishi Electronics WD-73CLL manual Is on, press Power to turn, One hour