Mitsubishi Electronics WD-73CLL Picture Mode, Format Compatibility, Depth DLP Link, Automatic

2. TV Menus 13

Picture, continued

3D

Picture Mode

Source

Format

Glasses

Emitter

E×ternal

Depth

DLP Link

Off

Automatic

Side=by-Side

Top/bottom

Checkerboard

2D+ Depth

Standard,

Reverse

Standard,

Reverse, Off

•Overrides the 3D processing of any HDMI 1.4a-compliant 3D signal and dis- plays the signal in 2D instead.

Allows access to some of the 2D picture adjustments that are hidden when the TV's3D mode is set to Automatic.

When the TV receives a 3D signal from an HDMI 1.4a-compliant device, forces the TV automatically into 3D mode and selects the correct 3D format.

When the TV receives a normal 2D signal, makes the TV automatically exit 3D mode.

Not effective with checkerboard 3D signals. Manually select Checkerboard when needed.

3D format choices for use with 3D signals that are not HDMI 1.4a compliant. When the TV receives a 3D signal that is not HDMI 1.4a compliant, you

must manually select a 3D format here based on the type of 3D signal being received.

Return the TV to Automatic or Off at the end of the non-compliant 3D program.

If an HDMI 1.4a compliant signal is received, the TV will automatically override any manual 3D selection.

When active, generates a simulated 3D image from an ordinary 2D signal.

For use with an external emitter connected to the	Use the Standard	or
TV's3D GLASSES EMITTER jack.	Reverse setting	to synchro-
	nizes left/right images to
	work with your 3D glasses.

Available only when Source	Format is set to 2D+ Depth.
Highlight the icon and press	ENTERto display the adjustment screen.
Allows adjustment of the 3D	effect from a flatter image to one with more depth.

For use with DLP Link.	Use the Standard	or
Select the Off setting if you are not using DLP	Reverse setting	to synchro-
Link glasses,	nizes left/right images to
	work with your 3D glasses.

Notice Concerning

The Mitsubishi TVs will support the mandatory HDMI 1.4a 3D signals intended for the United States. Spe- cifically, the TVs will support the 3D signals known as Frame Packing 1080p/24Hz and 720p/60Hz (primar- ily from Blu-ray players and gaming consoles), Side- by-Side in 1080i/60Hz, 1080p/24Hz/30Hz/60Hz and 720p/60Hz, Top/Bottom in 1080p/24Hz and 720p/60Hz,

Format Compatibility

and Checkerboard 1080p/60Hz. However, there may be some 3D sources that are not compatible with the TVs. In all cases: (1)3D sources must connect to the TVs using the HDMI inputs, and (2) Active Shutter 3D glasses with matching synchronization emitter or DLP Link Active Shutter 3D glasses are required in order to view 3D content.

For assistance call 1(800) 332-2119