Mitsubishi Electronics WD-73CLL manual Inputs and Outputs, R Input 1 audio

61. Additional TV Features

Inputs and Outputs, continued

Use the HDMI inputs to connect to CEA-861 HDMI com- pliant devices such as a high-definition receiver or DVD player. These inputs support 480i, 480p, 720p, 1080i, and 1080p video formats.

The TV'sHDMI inputs are compatible with many DVI-D and HDMI computer video signals.

2. ANT (Antenna)

Connect your main antenna or direct cable service (without a cable box) to ANT. The ANT input can receive digital and analog over-the-air channels from

a VHF/UHF antenna or non-scrambled digital/analog cable source.

3. 3D GLASSES EMITTER

Use this jack for the special synchronization emitter sup- plied with some 3D glasses. The emitter sends out a signal that synchronizes your 3D glasses with the screen display.

4.DIGITAL AUDIO OUTPUT

This output sends Dolby Digital or PCM digital audio to your digital A/V surround sound receiver. Incoming analog audio is converted by the TV to PCM digital audio.

If you have a digital A/V receiver, this is the only audio connection needed between the TV and your A/V receiver.

5. Y/VIDEO (Composite Video)

Analog standard-definition video inputs. Use the adja- cent R and L inputs if you wish to send audio to the TV speakers.

6. Y/VIDEO Pb Pr (Component Video)

Analog video inputs able to accept high-definition video from a high-definition source device. Use the adja- cent R and L inputs if you wish to send audio to the TV speakers.

7.L/R (INPUT 1 audio)

Analog stereo inputs for use in conjunction with adja- cent composite or component video jacks.

8. DVI/PC INPUT

Connect a DVI device to one of the TV'sHDMI inputs and use this jack to send analog audio to the TV.

9. USB

For software updates only. To check for updates, visit

www.mitsubishi=tv.corn and follow the support link.

Using the TV with an Audio-Only Device

To use the TV speakers to listen to an audio device such as an MP3 or CD player with analog output, follow these steps.

1.Insert an unused RCA-style connector into the

Y composite video jack. The presence of this con- nector activates the TV'sauto-detection.

3,

4,

When the TV detects the video connector, it will display the New Device Found screen. Name the new input CD/Audio or MP3 Player.

Connect left (white) and right (red) audio cables

from AUDIO OUT on the device to L and R on the TV.

Keep the connector in the Y jack while using the audio-only device.

device

For assistance call 1(800) 332-2119