32Appendices
Appendix B: Troubleshooting, continued
TV Power On/Off
Symptom
2.You cannot program the TV to turn on auto-
3.TV turned itself off and the light on the front panel started to blink.
4.TV will not power off.
Remarks
puter does.
•Momentary power fluctuation can cause the TV to turn off to prevent damage. Wait for the green light to stop flashing and turn the TV on again.
•If the TV does not stay on, press the POWERbutton on the control panel for ten seconds to perform System Reset. If this happens frequently, obtain an AC line power condi- tioner/surge protector.
•An unusual digital signal may have been received, triggering a protection circuit. Wait for the light to stop flashing and turn TV
Symptom
1. The picture does not look like a
tion picture,tion programming from your cable or satellite provider, you must subscribe to the provider's
3.You cannot view a picture when playing a
VHS tape. | , |
up and down.
5.When viewing a stopped VCR, white lines are rolling on the screen.
Press MENUon the remote control. If the menu displays, then there is a problem with the incoming signal.
•Check that all video inputs are plugged in firmly.
•Press and hold the POWERbutton on the control panel for ten
seconds to perform System Reset.
i
Check your VCR'sowner's guide for further troubleshooting.
provide
•Turn off video mute for the VCR.
•Begin playing the tape.
Change the VCR input from Line 1 to the VCR antenna input.
..... | PeiieciCoioicoiorbaiancehasbeenincorreciiysit: et |
the | PerfectColor balance. |
8.The image from a computer appears dis- • Normal TV operation. The TV does not correct distortion in
totted when viewed on the TV. | the picture from a computer because the correction process |
| may cut off the edges of the image. |
| The aspect ratio may be wrong for the image. Press FORMAT |
| to change. |
For assistance call 1(800}