EN-48
Advanced features (continued)
Password lock
This projector provides the password lock function
that is intended to prevent wrong operations by
children and set controlled access for specified users.
If the password lock is enabled, when the projector is
turned on, the startup screen (or splash screen) will
appear and stay on the screen until the password is
entered. When the password is entered, the startup
screen will switch to the regular operation screen.

To set a password:

(See page 22 for menu setting.)
1. Display the Option menu.
2. Press the or button to select Password.
Password OK
3. Press the ENTER button.
• The Password menu appears.
Password
Adjust Confirm
Select
Password
Change Password
Off
[ ���� ]
4. Press the or button to select Change
Password.
5. Press the ENTER button.
• Thescreenforenteringanewpassword
appears.
Password
Adjust Confirm
Select
Password
New Password
Off
[ ]
• When the password has already been set, the
screen for entering the old password appears
instead. In such a case, enter the old password
using the same operation as in next step and
press the ENTER button. Then the screen for
entering a new password appears.
6. Enter a 4 digit password using the , , and
buttons.
(=1, =2, =3, =4)
• To cancel the procedure, press the MENU
button.
7. Press the ENTER button.
8. Press the MENU button to exit the menu.

To enable or disable password lock:

(See page 22 for menu setting.)
1. Display the Option menu.
2. Press the or button to select Password.
3. Press the ENTER button.
• The Password menu appears.
4. Press the or button to select Password.
Password Off
5. Press the or button to select On or Off.
6. Press the MENU button to exit the menu.
Important:

• Todisablethepasswordlockwhenthescreen

for entering the password is displayed, press the

MENU and ENTER buttons on the projector at the

same time.