Mitsubishi Electronics WS-65315A, WT-42315, WS-55315 Connecting an Antenna or Wall Outlet Cable

Connecting an Antenna or Wall Outlet Cable

Note: The TV back panel and connections shown here are for reference only and may vary by model.

�������������������������

�������������������������������

Separate UHF and VHF Antennas

(Figure 1)

Outlet Cable

���������������

��������

�������

��������

��������������

����������

�������

��������

���	�
���

���� ����

�������������������������������

	� �� �
�� � � �	��� � � � � �

1.Connect the UHF and VHF antenna leads to the UHF/VHF combiner.

2.Push the combiner onto ANT-A on the TV back panel.

UHF/VHF combiners are not provided with the TV. They are available at most electronic stores.

Note: This TV will only be able to provide an

an Antenna or Wall

�

Figure 1. Connecting separate UHF and VHF antennas.

Mitsubishi strongly recommends against using antennas with twin flat leads. Twin flat lead antenna wires are subject to interference which may adversely affect the performance of the TV. We recommend using coaxial antenna cable.

analog signal through ANT-A on the TV back panel.

See page 5 for Outdoor Antenna Grounding information.

Twin Lead Antenna, Coaxial Lead Antenna, or Wall Outlet Cable

(Figure 2)

For antenna with twin flat leads:

Connecting

������������������

��������� �������������

�

�

�

��������������������������

��������������������

�������������������������������

	� �� �
�� � � �	��� � � � � �

1.Connect the 300 Ohm twin leads to the transformer.

2.Push the 75 Ohm side of the transformer onto ANT-A on the TV back panel.

300 Ohm to 75 Ohm matching transformers are not provided with the TV. They are available at most electronic stores.

Figure 2. Connecting twin lead antenna, coaxial lead antenna, or wall outlet cable.

Additional connection cables are not provided with the TV. They should be available at most electronic stores.

For cable or antenna with coaxial lead:

3.Connect the incoming cable to ANT-A on the TV back panel.

Note: This TV will only be able to provide an analog signal through ANT-A on the TV back panel.

See page 5 for Outdoor Antenna Grounding information.

14