Mitsubishi Electronics WS-65315A, WT-42315, WS-55315 Connecting an Antenna to a Cable Box or VCR

Connecting an Antenna to a Cable Box or VCR

Note: The TV back panel and connections shown here are for reference only and may vary by model.

Cable Box

(Figure 3)

1.Connect the incoming cable to ANT-A on the TV back panel.

Connect two coaxial cables as follows:

2.One from LOOP-OUT on the TV back panel to IN on the cable box back panel.

3.One from OUT on the cable box back panel to ANT-B on the TV back panel.

Note: If your cable box has separate audio/video outputs, please see Composite Video with Audio or S-Video with Audio, page 16 (Figure 6).

�������������������������������

	�� � � �	� �� �	� � � � �
��������������		���

�

�

�

���������

�������������������������������

Connecting an

�����

Figure 3. Connecting the cable box.

Antenna

Antenna or Wall Outlet Cable

(Figure 4)

1.Connect the incoming cable to ANT-A on the TV back panel.

Connect two coaxial cables as follows:

2.One from LOOP-OUT on the TV back panel to ANTENNA IN on the VCR back panel.

3.One from VCR back panel ANTENNA OUT to ANT-B on the TV back panel.

Note: If your cable box has separate audio/ video outputs, please see Composite Video with Audio or S-Video with Audio, page 16 (Figure 6).

		�������������������������������
		�� � � �		� �� �	� � � � �
				���
��������������	�
					�
��������������
	�	���������		��������	���������
��		�		�	�����
�������		�	�	�
				�������
		�		�
	�
���

Figure 4. Connecting the VCR with antenna or wall outlet cable.

to a Cable Box or VCR

Note: For models WS-48315, WS-55315, WS-65315 and WS-65315A, when the Energy Mode is set to Low, the VCR may not record programs when the TV is off.

Note: For digital cable boxes, refer to your Digital Cable Box owner’s guide for instructions on optimal connections to this TV.

15