Moen 87030 Water Filtration Safeguards, MicroTech Filter Cartridges, Water Temperature, Questions

WATER FILTRATION SAFEGUARDS

Your PureTouch® Classic Filtering Faucet System integrates carbon block filtration technology designed by Culligan® International into a faucet spout. This technology is fast and effective at reducing contaminants commonly found in water and is certified by NSF® International. The PureTouch Filtering Faucet System and installation must comply with State and Local laws and regulations. To ensure optimal operation of your new Moen faucet, please read the following safeguards carefully.

MicroTech™ Filter Cartridges

• MicroTech filter cartridges will reduce :

Chlorine, Taste and Odor (MicroTech 400, 600) Lead (MicroTech 400, 600)

Cysts (Cryptosporidium, Giardia)(MicroTech 600)*

*The contaminants removed or reduced by this filter are not necessarily in your water.

•Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts.

•MicroTech filter cartridges are designed for replacement after dispensing 200 gallons of filtered water. Water conditions and usage may affect filter life and water taste.

•The electronic indicator will signal when filter replacement is necessary (see page 9).

•Use only MicroTech 400 or 600 filter cartridges with the PureTouch Classic Filtering Faucet System.

•Filter flow rate = .4-.6 gpm at rated pressure (20psi min. - 125psi max.).

Water Temperature

•Minimum/Maximum faucet operating temperature = 40° - 150°F.

•CAUTION: Do not filter water above 100° F.

MicroTech Filter Flushing Instructions

•New MicroTech Filter Cartridge: After installing a new filter into the faucet, allow cold water to run through the filtered water outlet for 5 minutes to flush out any loose carbon particles. The filter life indicator will alternately flash amber and green for the first five minutes after the indicator is manually reset (see page 9) as an aid in timing the filter flushing period.

•Daily Use: Allow cold water to run through the filter for 10-15 seconds prior to first use. If the filter has not been used for several days, run cold water through the filter for 60 seconds prior to use.

Questions
• If you have any questions please call our toll-free helpline,
1-877-DRINK-H2O. Monday through Friday		8:00 a.m. to 8:00 p.m.
1-877-(374-6542)	Saturday	8:00 a.m. to 6:30 p.m.
3	HELPLINE: 1-877-DRINK-H2O		INS215A
	1-877-(374-6542)