Operation

Using the Oven - Manual Mode

1. TURN ‘ON’.

Press ‘On-Off’ button.

Temperature Dislay.

Temperature Display will show actual temperature.

2.SET TEMPERATURE.

+to increase the temperature. - to decrease the temperature.

Time Display.

Time Display will show actual time set.

Power ‘On’

Indicator

3.SET TIME.

+to increase the time. - to decrease the time.

4.START TIMER.

Press ‘Start / Stop’ button to start timer operation.

-Press any button, to cancel the ‘Alarm’.

- Press ‘Grill / Broil’ button, to select the Grill / Broil mode.

To check actual oven temperature during preheat or cooking, press

‘Temperature’ button. Actual temperature will display briefly on ‘Temperature Display’ before the display reverts to the pre-set temperature.

Heating ‘On’

Indicator

At any time during cooking, time and temperature can be adjusted by using the ‘Time’ / ‘Temperature’ controls.

Timer ‘On’

Indicator

This oven can be used without using the ‘Timer’, as it is purely a timer and does not control the baking operation of the oven.

If the ‘Timer’ is set to the ‘Infinity’

setting , the timer will count elapsed time to a maximum of 999 minutes.

Opening the oven door during a cooking cycle will pause the

cooking time. To continue cooking, close the oven door.

- Press ‘Act Temp’ button, to check ‘Actual’ temperature of oven at any time during cooking.

- Press ‘Light’ button, to turn ‘On’ oven light. (refer - ‘Operator Accessible Parameters’).

- Press ‘Program’ button, to program the Oven refer to the ‘Installation and Operation Manual’.

- Press and hold ‘On / Off’ button, for 3 seconds to turn ‘Off’ the Oven.

Grill / Broil; - Grill / Broil function can be selected at any time during the Manual Mode by pressing the ‘Grill / Broil’ button. The ‘Grill / Broil’ LED will illuminate.

The Time Display will show either ‘Grill’ or ‘Broil’ .

On completion of the Grill / Broil mode, the oven temperature will return to the temperature previously set. 8

Page 10
Image 10
Moffat E31D4 operation manual Using the Oven Manual Mode, Turn ‘ON’, SET Temperature, SET Time, Start Timer