Positioning
The appliance should only be installed at a location where the ambient temperature corresponds to the climate classification indicated on the rating plate, which is located on the inside right of the appliance.
The following table shows which ambient temperature is correct for each climate classification:
SN +10°C to + 32°C
N+16°C to + 32°C
ST +18°C to + 38°C
T +18°C to + 43°C
The appliance should be located in a dry atmosphere, out of direct sunlight and away from continuous heat and extreme temperature, e.g. not next to a boiler or radiator or in a very cold room e.g. an outhouse. If these temperatures are exceeded i.e. warmer or colder, then the appliance may not operate correctly.
For
Door Reversal
To reverse the opening direction of the door, proceed as shown in the figures:
|
| 6 |
|
| 4 |
| 1 |
|
|
| 5 |
| 2 | 6 |
|
| |
1 |
| 3 |
|
|
Attention
6 |
7 |
8 |
2 |
6 |
|
10 |
|
| 13 |
9 |
|
6 | 12 |
11 |
|
3 |
|
After completion of the door reversing operation, check that the door gasket adheres to the cabinet. If the ambient temperature is cold (i.e. in Winter), the gasket may not fit perfectly to the cabinet. In that case, wait for the natural fitting of the gasket or accelerate this process by heating up the part involved with a normal hairdryer on a low setting.
14