Building-in instructions
Before carrying out any work, remove the plug from the power socket.
Grid preparation
Left door opening:
Remove the left side (A) of the grid cutting it from the rear (see figure).
Installation kit
1xB2xC
1xA
A
B
2xG
2xF
1xK
18xI
2xL |
|
2xD | 2xE |
|
DO002/2
Right door opening:
Remove the right side (B) of the grid cutting it from the rear (see figure).
To position the grid on the appliance proceed as follows:
Apply the grid to the base of the appliance by pushing on to the clasps (a) until they click.
600
550 min.
600
DO013
Building in the appliance under a worktop
The dimensions of the recessed installation area must correspond with those indicated in the figure.
a
a
DO001
1.Two cabinet securing brackets are supplied with the installation pack. They need to be assembled onto the cabinet prior to cabinet being pushed into the Kitchen aperture.
-To fit these brackets remove the two screws at the top left and right hand front corners of the cabinet.
-Position the two brackets as shown in the figure and replace the two securing screws.
Left hand bracket | Right hand bracket |
15
