Monessen Hearth BTU/Hr installation manual Installation Items

Models: BTU/Hr

1 32
Download 32 pages 22.31 Kb
Page 11
Image 11
INSTALLATION

INSTALLATION

NOTICEINSTALLATION ITEMS

This heater is intended for use as supplemental heat. Use this heater along with your primary heating system. Do not install this heater as your primary heat source. If you have a central heating system, you may run system’s circulating blower while using heater. This will help circulate the heat throughout the house. In the event of a power outage, you can use this heater as your primary heat source.

WARNING

A qualified service person must install heater. Follow all local codes.

CAUTION

CHECK GAS TYPE: The gas supply must be the same as stated on the heater’s rating plate. If the gas supply is different, DO NOT INSTALL THE HEATER. Contact your dealer for the correct model.

INSTALLATION ITEMS

Before installing heater, make sure you have the items listed below.

• external regulator (supplied by installer for propane/LPG and 1/2 lb. natural gas systems)

• piping (check local codes)

• pipe wrench

• tee joint

• sealant (resistant to propane/LP gas)

• equipment shutoff valve*

• ground joint union

*A CSA design-certified equipment shutoff valve with 1/8” NPT tap is an acceptable alternative to test gauge connec- tion. Purchase the optional CSA design-certified equipment shutoff valve from your dealer.

49D0090

11

Page 11
Image 11
Monessen Hearth BTU/Hr installation manual Installation Items