LOG PLACEMENT
Before you begin — This unit is supplied with seven (7) ceramic fiber logs. Do not handle these logs with your bare hands. Always wear gloves to prevent skin irritation from ceramic fibers. After handling the logs, wash your hands gently with soap and water to remove any traces of fibers.
WARNING
The positioning of the logs is critical to the safe and clean operation of this heater. Sooting and other problems may result if the logs are not properly and firmly positioned in the appliance. Never add additional logs or embellishments such as pine cones, vermiculite or rock wool to the heater. Only use the logs and
Failure to position the parts in accordance with diagrams below or to use only parts specifically approved for this heater may result in property damage or personal injury.
PlacE Rock Wool
Before installing logs, place rock- wool in dime size pieces evenly over small burner ports starting in front of the rear deflector shield towards the front. Avoid placing rock wool over the slots on rear and right side of burner and on large yellow flame ports on front of burner.
Wash hands after placing rock wool. Itching may occur.
| warning |
| rock wool. |
|
|
| • Use only rock wool |
|
|
| provided with log set. |
|
|
| • Do not add additional |
|
|
|
|
Pieces of Rock
Wool
Figure 18 - Place Rock Wool
FP2011
LG552
Figure 19 - Correct Rock Wool Placement
86D0024 | 23 |
