Motion 42-02-S028 USN Installation, IMC, PTC, PHC Installation, MCE Universal Serial Network

MCE Universal Serial Network

USN Installation

Installation instructions include:

•MCE IMC and PTC/PHC Controls

•Motion 3000ES Escalator Controls

•USN Power Connection

Note

After mounting USN components in your equipment, ensure that no serial, ethernet, or CAN connections are made to the device. Only power should be connected during initial setup.

IMC, PTC, PHC Installation

The Universal Serial Network (USN) converts legacy MCE communication protocols to the lat- est MCE monitoring, reporting, and building management compatible protocols. For IMC, only the USN-BASE assembly and power transformer are required. For programmable (PTC/PHC) controllers, one M2C assembly is required for each controller in addition to the USN-BASE assembly and power transformer.

CAN 2

AC1/AC2

Port B J7

PCA JP3

Ethernet

Port A

J5

M2C Assembly

USN-BASE Assembly

Power transformer -

6-feet power leads are provided but are not connected to the transformer. Cut leads to length required and connect to transformer per local requirements.

2 Manual # 42-02-S028 A1