Motorola 3460 Fast'R Plus Step Stage

3460 Fast’R

A-10

Off-Line Configuration (OLC) Button

The off-line configuration button, labelled OLC, is located on the front

of the card.

Pressing the button makes the modem enter command mode, in which

the user in synchronous or leased-line environments can change config-

uration options.

Use the OLC button to change a configuration as follows.

Changing a Configuration With the OLC Button

Step Stage

1Change one or more configuration options.

2Enter the Save to Option Set command (AT&Wn, where n is 1 or 2).

3Enter the Option Set to Power Up In command (AT&Yn, where n is:

0 for last-loaded option set; 1 for Option Set 1, or 2 for Option Set 2)

4Press the OLC button. The modem restarts and powers up using the

selected configuration option set.

Contents

Main Notices Page Page Contents Page About This Guide Introduction Page Product Company/Organization Page Chapter 1 Introduction 3460 FastR Overview Network Management Support 1-2 1-3 Page Chapter 2 Access Security Functions In This Chapter Enabling Password Verification by a Local Modem Step Stage Step Stage Page Command Factory Default Option Description Appendix A Specifications In This Appendix Physical Characteristics Operating Modes Fax Environmental Limits Product Safety Regulatory Marking Condition Modem Card AccessWay Stand-Alone Condition Modem Card AccessWay Stand- Alone Electromagnetic Compatibility Fax Branding AccessWay Enclosure Power Supply and Power Requirements Figure A-1. AccessWay Backplane Connectors AccessWay Enclosure Connectors and Interfaces A-7 Modems That Support Two-Wire Leased or Dial Connections Modems That Support Two- or Four-Wire Leased or Dial Connections LINE A Connectors LINE B Connectors Computer Interface V.24 Signal Number Pin Circuit Function RJ11 Interface Pinouts Pin Function Page Step Stage Vanguard 3460 V.34 Daughtercard Connectors and Interfaces Pin Signal Stand-Alone Modem Interfaces and Connectors Computer Interface Pin Circuit Function Page Network Management Interface Pinouts Power Interface Step Stage A-17 Panel Indicators and Switches Front Panel Interface Indicator Description Front-Panel User Interface Figure A-2. 3460 FastR Plus Modem Front Panel Interface Front Panel Interface (continued) Indicator Description Compatibility Button Function Page Appendix B Country-Specific Information B-2 Australia, New Zealand B-3 Austria B-4 Belgium B-5 Canada B-6 Denmark, Netherlands, Luxembourg B-7 Finland 3460 FastR B-8 Option Available France S-Register Command Cross-Reference Register Parameter Command Description B-9 Germany B-10 India B-11 Italy B-12 Japan B-13 Malaysia B-14 Norway B-15 Portugal B-16 Singapore B-17 South Africa B-18 Spain B-19 Switzerland B-20 Universal/International B-21 Universal/International - CTR21 3460 FastR B-22 Universal/International - CTR15, CTR17, CTR21 B-23 Universal/International - K.21 B-24 Universal/International - K.21- Czech Republic B-25 U. S. A. Page Appendix C Attention (AT) Commands for Fax In This Appendix AT Command Set Table 2-1. Fax Class 1 AT Command Set C-2 Action Commands C-3 Configuration Commands C-4 C-5 Capabilities Identification and Control Commands C-6 Action Commands Configuration Commands C-7 C-8 C-9 Page C-11 Result Messages and Codes Table 2-3. Result Messages and Codes Text Form Numeric C-12 C-13 C-14 C-15 Table 2-4. Disconnect Reasons Text Form Numeric Code Description Code Description C-16 Table 2-5. +FHS Command Responses: Hang-Up Status Codes Value Description Table 2-4. Disconnect Reasons (continued) Code Description Code Description C-17 Table 2-5. +FHS Command Responses: Hang-Up Status Codes (continued) Value Description Page C-19 Table 2-8. Frame Sub-Parameters Label Function Value Description Page Index