Motorola 3460 Fast'R Plus manual C-8

3460 Fast’R
C-8
+FCQ=r, t Controls copy quality checking (conformance to
negotiated T.4 format) and correction by fax modem of:
r - Received image data
t - Transmitted image data
r options:
0 Disables receive copy quality checking. The modem
generates MCF (Copy Quality OK) responses and sets
+FPS=1.
1Enables receive copy quality checking. The modem
determines the post-page message and stores it in the
+FPS parameter.
2 Enables receive copy quality checking. The modem
determines the post-page message, stores it in the +FPS
parameter, and detects and corrects errors in data
received from the remote station.
t options:
0Disables transmit copy quality checking.
1 Enables transmit copy quality checking. The modem
returns <CAN> to the computer if errors are detected
2 Enables transmit copy quality checking. The modem
detects and corrects errors in the data received f rom the
local computer.
+FLO=nFlow Control
Specifies the computer/modem flow control method.
0 None
1XON/XOFF
2 RTS/CTS
+FPR=nSerial Port Rate
Specifies the computer/modem serial port rat e. This
parameter has no effect when +FCLASS=0.
1 2400 BPS
2 4800 BPS
3 7200 BPS
Table 2-2. Fax Class 2.0 AT Command Set (continued)
Command Option Description
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country’s options,
refer to the 3460 Fast’R Reference Guide (T0022).
Default (pre-set) options are underlined.