Motorola 6809494A40-O manual Pairing, with your Phone, Removing the Module from your Eyewear

Removing the Module from your Eyewear
To remove the module from your frames:
1	Hold the body of the module in your right
	hand.
2	Hold the arm of the eyewear frame that
	the module is attached.
3	Gently twist the module until the clamp
	snaps open and you can remove it from
	the frame.

Pairing		™
with your Phone
You must pair (or bond) your RAZRWIRE module with your phone before they will
work together. This procedure only needs to be performed once and then the next
time you turn on your RAZRWIRE module and phone they will automatically pair.
To pair your module and phone:
1	On your Motorola phone*, select M(Menu) > Settings > Connection > Bluetooth Link >
	Handsfree > Look for Devices.

2

With the module turned off, press and hold the Multifunction Button until you hear a high-pitched tone in the ear speaker.

Note: When the module is successfully in pairing mode the indicator light will remain solidly lit.

			Microphone
Multifunction	Indicator	Volume	Volume
Button	Light	Down	Up

3	The phone lists all Bluetooth devices it finds.
	Select Oakley RAZRWIRE.
4	Select OK or Yes to pair (bond) the headset.
5	Enter the passkey: 0000
6	Select OK.
7	When your RAZRWIRE is successfully paired with your phone, the Indicator
	Light flashes ten times and automatically turns on for use.
*These steps are for most Motorola phones. For other phones, see your phone
user's guide.

4