Using

 

Adjusting RAZRWIRE for a Comfortable Fit

You may need to adjust the

 

position of the module so that

 

the speaker fits comfortably in

 

Turning the Module On & Off To turn the Module On:

Press and hold the Multifunction Button until the Indicator Light flashed three times. If you are wearing RAZRWIRE, you will hear an inclining tone through the ear speaker.

 

 

 

Microphone

Multifunction

Indicator

Volume

Volume

Button

Light

Down

Up

your ear.

To do so, simply slide the module

forward or back along the frame

temple.

Answering & Ending a Call

To answer an incoming call:

Press the Multifunction Button until you hear the call is answered.

To end a call:

Press the Multifunction Button.

To reject a call:

When the phone rings, press and hold the Multifunction Button until you hear a

medium-pitch tone in the ear speaker.

Note: Once you pair RAZRWIRE module

with your phone (see Pairing RAZRWIRE with your Phone on page 4),

it automatically pairs each time you turn it on.

To turn the Module Off:

While not participating in an active call, press and hold the Multifunction Button

until you hear low and medium pitch tones, then declining tones through the ear

speaker. The Indicator Light flashes twice upon power down.

Note:

 

When the module is activated, it is in "standby" mode, ready for use.

 

The internal rechargeable battery offers approximately 100 hours of

 

standby time.

When RAZRWIRE is turned off, it uses no power. However, the internal

 

rechargeable battery will naturally wear down over time and eventually

 

requires charging.

5

Page 7
Image 7
Motorola 6809494A40-O manual Using, Adjusting Razrwire for a Comfortable Fit, Answering & Ending a Call