Motorola APS120 2.5

2 • 5

4. Connect the PCI interface. To send the pre-programmed database,

refer to section 3.6.3, Sending the Database.

5. If you are connecting a modem, go to section 2.5, Connecting the Modem n o w.

If not, go on to Step 6.

6. Connect the output plug from the power supply to the 9V AC jack on the

unit. Plug the power supply into a 110V AC outlet. The power LED on the

unit should be lit.

F i g u re 2-1: Contact Closure to Pin Assignments

2.5 Connecting the Modem

Verify dipswitch settings on the modem. 1-4-6-7 UP. 2-3-5-8- DOWN.

To set up the modem, do the following:

1. Make sure that both the APS Custom and the modem are turned off.

2. Connect the modem to the PCI/Modem port on the APS Custom unit. Use

the modem cable supplied with the APS Custom.

3. Connect the modem to a phone line with a telephone cord. Note the

number for that phone line.

4. Connect the modem's power supply to the modem and plug it in.

5. Turn on the modem.

6. Connect the output plug from the power supply to the 9V AC jack on the

unit. Plug the power supply into a 110V AC outlet. The power LED on the unit

should be lit. The INUSE Program LEDs will flash several times and then stop.

The APS Custom will automatically detect the modem and initialize it. The APS Custom is

now ready for remote access.

Cable

Pin Function Color Code

1 Contact 1 Brown

2 Contact 2 Red

3 Contact 3 Orange

4 Contact 4 Yellow

5 Contact 5 Green

6 Contact 6 Blue

7 Contact 7 Purple

8 Contact 8 Grey

9 Common White

Contents

Main APSCustom Installation and Configuration Page 1.0 2.0 3.0 Page 4.0 5.0 6.0 Page The APS Custom offers a variety of benefits, including: 1.1 1.1.1 1 2 1.1.2 NOTE: The terms Line and Port are interc h a n g e a b l e . 1 2 3 4 5 123 54 1 3 1.1.3 1.2 1 4 1.2.1 1.2.2 2.1 2 1 2.2 2 2 2 3 2.3 2 4 2.4 2 5 2.5 2.6 2 6 The APS Custom PCI enables you to: 3.1 3.1.1 NOTE: It may take a few minutes for the introductory graphic to appear on the screen. 3.2 3.2.1 3 2 Page 3 4 3 5 3.2.2 3.2.2.1 3.2.3 3 6 3.2.3.1 3 8 3.2.3.2 3.2.3.3 9 3 * # 3.2.3.4 3.2.3.5 3 10 3.2.4 3.2.5 3.2.5.1 3 11 An announcement (a) A user name (n) A digit string (d). Announcement NOTE: See Section 5.2.2.1, Recording an Announcement and Form 2 in Appendix F. 3.2.5.2 3.2.5.3 Digit String 3.2.6 3 13 3.3 3 14 NOTE: The system default is normal priority. 3.3.1 3.2.7 3.4 3.4.1 3.4.1.1 3.4.1.6 3.4.1.2 3.4.1.3 3.4.1.4 3.4.1.5 3 17 Local Wireless Paging Information Wide Area Paging Information NOTE: Many paging services require all entries to be followed by the # (pound) key. 3 18 3.4.2 3.4.3 3.5 3 19 3 20 3.5.1 3.5.2 3.6 3.5.3 3 2 2 3.6.1 3.6.2 3.6.3 3.6.4 3 2 3 3 24 3.6.5 Best Transmitter Placement 3.6.6 3.7 3.8 4.1 4.1.1 4.1.2 4.2 5 1 5.1 5.1.1 5 2 5 . 1 . 1 . 1 5 . 2 . 1 . 1 5.2 5.2.1 5 3 5 . 2 . 1 . 2 5.2.2 5 4 5 . 2 . 2 . 1 Recording System Announcements Page Page 5.3 5.4 5 8 NOTE: The Main Menu does not specify *(star) as an option. 5.5 5 . 5 . 1 . 1 5 . 5 . 1 Sending a Local Wireless Page 5 1 0 5 . 5 . 1 . 2 5 . 5 . 1 . 3 5 1 1 5.5.2 5.6 5.7 6 1 C h a p t e r S i x T r o u b l e s h o o t i n g 6.1 6 2 6 3 6 4 6 5 6 6 6.2 A ? A 2 B 1 B P a s s w o rd s B 2 C 1 A p p e n d i x PBX Feature Requirements for APS Custom Featur e s C APS Cus tom Feat ure N e c e s s a ry PBX F eature D 1 D Tro u b l e s h o o t i n g D 2 NOTE: Do not enable Carrier Detect. E Page Page G ro up Pa g i n g R e co r d s S h e et F 3 G ro u p P a g i ng R ec o r ds S h ee t Page G 1 A P S C u s t o m I n d e x C A D G 2 P G H I L M N O G 3 T U R V